Option Page-Input Signal

F011

Totalizer

Step 1 of 8

Select Input signal

A

Info

(0)4 - 20 mA analog input
P

Info

Pulse input: Namur, Coil, reed, NPN (PNP) open collector/drain

Option A

This option will exclude option(s)

Options

ZG - Coil input 5mVp-p

ZF - Coil input 10mVp-p

Option details A

(0)4 - 20mA. Analog input signal can be scaled to any desired range within 0 - 20mA

Accuracy: Resolution: 16 bit. Error < 0.01mA / ± 0.05% FS. Low level cut-off programmable.
Span: 0.001 / 999,999 with variable decimal position.
Update time: Four times per second.
Voltage drop: Type A: max. 1V DC @ 20mA.
Voltage drop: Type A - PL (loop powered): max. 2.6V DC @ 20mA.
Relationship: Linear and square root calculation.
Note: For signal type A and U: external power to sensor is required; e.g. type PD.

.

Option P

This option will exclude option(s)

Power requirement

PL - Input loop powered from sensor signal 4 - 20mA (type A)

Option details P

Coil / sine wave (minimum 20mVpp or 80mVpp - sensitivity selectable), NPN/PNP (open collector/drain), reedswitch, Namur, active pulse signals 8 - 12 and 24V DC.

Frequency Minimum 0Hz - maximum 7kHz for total and flow rate. Maximum frequency depends on signal type and

internal low-pass filter. E.g. reed switch with low-pass filter: max. frequency 120Hz.

K-Factor 0.000010 - 9,999,999 with variable decimal position.

Low-pass filter Available for all pulse signals.

Option ZF coil sensitivity 10mVpp. ZG (if available) coil sensitivity 5mVpp.

Ordering Code: F011

Are you sure you want to change to this option and go back in the configuration?

* Required field.

Current Password *
New Password *
Confirm New Password *